Published at Monday, September 18th 2017. by Josefa Navarro in Home Design.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
If you did like to apply this principle on your own house is architecture, you have to focus on being simple and keeping things at their most natural state. You should choose a flatter roof and more open spaces. Try avoiding a roof structure that has a steep pitch. For your interior house design, if you need to have a private space, try avoiding permanent walls and use a shoji or a sliding door, instead. In this way, you can still have an open space when you do not need an enclosed area.
Windows are also crucial in creating open spaces in minimalist house designs. Large sliding windows are ideal. If you need to use blinds, select those made of bamboo or wood or those that are of neutral color. If you prefer to use curtains, do not use ones with floral or ornate prints. Choose those with sheer materials, preferably of white, beige, sand, and other neutral hues.
Because lot sizes vary from large to small, setbacks may be an issue. Another factor is whether or not the site is level or has a slope. Sloped sites are quite workable but present unique challenges that must be considered. Generally on sloped lots the hangars are placed on the lower section and the home on the higher section which allows the home and hangar to blend with one another nicely.
As in most residential developments usually there are the restrictions. These restrictions can govern the size of the home, the size of the hangars, architectural factors such as whether or not the hangar must blend in with home, taxiway clearance issues and the like. As with any design it is important to become familiar with these covenants prior to beginning any design.
New home ideas can turn an otherwise simple home into something spectacular, such as with adding features that would have been more common in older homes, like the ceiling medallions and crown moldings. Such features add beauty and interest to what would otherwise be very bland spaces. A smart idea that uses space wisely includes maximizing every square inch available, such as in the commonly wasted space beneath a staircase, which can be altered with fitted pull out drawers. This would provide space to store outerwear, footwear, and much more!