Published at Saturday, 30 December 2017 by Josefa Navarro in Home Design, with total 16 photos.
Good planning for the future
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
These are only a few points to consider in the design of your hangar home - there are many others. Due to the uniqueness of hangar homes design it is recommended that you choose a designer who has had ample experience in designing hangar homes and who preferably lives and a hangar home personally. If you are looking for designs on the Internet, you will likely become frustrated. If you are intending to invest in a hangar homes to be built, it is best to find a designer to custom design a plan uniquely for you. Regardless of what type of design you end up building, your decision to design and build a hangar home will be, without doubt, one of the most thrilling and fulfilling actions you will take a pilot.