Published at Thursday, January 11th 2018. by Catherine Good in Home Design.
Focus on lighting--both artificial and natural light. The home can never have too much light, and so the budget should allow for numerous light sources throughout the home, from one room to the next. Keep in mind that one central ceiling-mounted light fixture just wont do, and instead, aim for six light sources per room. As for natural light, with all the advances in insulated windows today, choose a design that lets the sun shine in through as many openings as possible.
If you did like to apply this principle on your own house is architecture, you have to focus on being simple and keeping things at their most natural state. You should choose a flatter roof and more open spaces. Try avoiding a roof structure that has a steep pitch. For your interior house design, if you need to have a private space, try avoiding permanent walls and use a shoji or a sliding door, instead. In this way, you can still have an open space when you do not need an enclosed area.
Flooring should go with the simple and natural theme. Wood is often the choice for this style. You can still have stone tiles, but refrain from the shiny types. Muted stone tiles in earth colors would be best.
Here are some of the best benefits of a universal home design:
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
Because lot sizes vary from large to small, setbacks may be an issue. Another factor is whether or not the site is level or has a slope. Sloped sites are quite workable but present unique challenges that must be considered. Generally on sloped lots the hangars are placed on the lower section and the home on the higher section which allows the home and hangar to blend with one another nicely.