Published at Wednesday, 17 January 2018 by Crystal Welch in Home Design, with total 30 images.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
New home ideas and trends will enable you to design your dream home as you see fit. Your newly built home does not have to be a box divided by walls. Impressive solutions for a functional home exist for all budgets.
Wood beams, walls, and countertops should be left in their barest look. If the item is of wood material, the most you should do is have it stained to bring out the natural beauty of the wood. Stone countertops should just be polished also to bring out the grains and specks of the material. Metal items should also just be polished and not painted.