Published at Friday, January 05th 2018. by bandot in Home Design.
If you decide to use a universal home design to build your new home, you can expect your house to be worth more at the outset than another home of similar square footage and amenities, but that is not built from a universal design. The reason is that a universally designed house is more appealing to all segments of the population because of its practicality and usability for everyone. Universally designed homes are easier to sell and acrue in value more readily.
There are few more unique lifestyles than living in an airport community. The designing of a hangar home is a unique skill and one best handled by professional designer well experienced in the subject. In this article we will cover a few specific points that you will value as suggestions to consider.
If you did like to apply this principle on your own house is architecture, you have to focus on being simple and keeping things at their most natural state. You should choose a flatter roof and more open spaces. Try avoiding a roof structure that has a steep pitch. For your interior house design, if you need to have a private space, try avoiding permanent walls and use a shoji or a sliding door, instead. In this way, you can still have an open space when you do not need an enclosed area.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
These are just some ideas to help you have your own home in the minimalist look that you want. You can add in your own concepts to add personal touches. Simply keep in mind about open spaces and being one with nature and you wont go wrong.
Another thing to consider is fuel. Do you want to keep fuel in a fuel tank that you will keep inside your hangar? Perhaps there is fuel on the property that is maintained by the Association; this can be an excellent way when available. Of course, one can always fly out for fuel and this is workable most of the time but it does require careful organization of one is flights and fuel stops.