Published at Friday, January 12th 2018. by Carla Shannon in Home Design.
Wood beams, walls, and countertops should be left in their barest look. If the item is of wood material, the most you should do is have it stained to bring out the natural beauty of the wood. Stone countertops should just be polished also to bring out the grains and specks of the material. Metal items should also just be polished and not painted.
Another thing to consider is fuel. Do you want to keep fuel in a fuel tank that you will keep inside your hangar? Perhaps there is fuel on the property that is maintained by the Association; this can be an excellent way when available. Of course, one can always fly out for fuel and this is workable most of the time but it does require careful organization of one is flights and fuel stops.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
Here are some home design tips that help you build your dream home.
For those who plan on living in their homes until they die, this type of house design is excellent because it will accommodate occupants in any change of life. If an occupant becomes suddenly disabled or eventually must have certain handicap amenities in areas like the bathroom due to aging issues, this design allows for changes in life that are bound to occur.
As in most residential developments usually there are the restrictions. These restrictions can govern the size of the home, the size of the hangars, architectural factors such as whether or not the hangar must blend in with home, taxiway clearance issues and the like. As with any design it is important to become familiar with these covenants prior to beginning any design.