Published at Wednesday, 17 January 2018 by Susan Stark in Home Design, with total 28 drawings.
Another common point to consider is whether or not to connect the hangar in the home. Connecting or not connecting each has its advantages and disadvantages. Connecting the hangar to the home is considered by most pilots to be quite advantageous. It allows one to stay out of the weather. It makes for some very interesting architecture. But if you are looking to build projects then you need to consider the impact made by these projects such as sounds and smells which you may not want to enter into the home. In such instances building the hangar and home separately may be the way to go.
Given the opportunity to build simple home designs enable the homeowner to add personal touches to customize their future home so that it meets their own needs. For instance, a very outgoing and athletic family needs solutions to store away their sporting equipment when it is not in use, but in a way that their equipment is easy to reach whenever necessary. This is what makes a home functional, and it is imperative in modern home design. Future homeowners can work side-by-side with architects to customize their homes to perfect them according to their individual lifestyles. It can be a small adjustment to increase the size of a closet, which could make all the difference, but would likely not greatly affect the budget.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.