Published at Monday, January 08th 2018. by Susan Stark in Home Design.
There are few more unique lifestyles than living in an airport community. The designing of a hangar home is a unique skill and one best handled by professional designer well experienced in the subject. In this article we will cover a few specific points that you will value as suggestions to consider.
Here are some of the best benefits of a universal home design:
Another important decision is to determine what type of the door you want. Hangar doors come, basically, in three types: hydraulic, accordion and bifold. There may be others but those are the most common. Hydraulic doors are usually hinged at the top and are opened as one single slab and in the open positions act as separate roof shielding the area just outside the hangar. These tend to be expensive but are very popular. Another common door is the bifold door. Bifold hangar doors normally have horizontal hinges, usually only one horizontally in the center. They are raised with belts or chains and tend to raise from the bottom up. Accordion doors are less common but are extremely practical. They require a track both at the top and the bottom and can be simply pushed to the side to open up the space. One advantage to accordion doors is that they do not require electricity to operate. Looking at various doors types is a good idea so that you can make an educated choice as to what type of door to select.
A key question is to consider how large to make the hangar. The first thing to consider is the 2000 square foot question. Most codes in the United States differentiate between hangars less than 2000 ft. and those that are larger. In general, commercial codes apply to larger hangars whereby easier residential codes will apply to the smaller hangars. This can affect the pricing.
Because lot sizes vary from large to small, setbacks may be an issue. Another factor is whether or not the site is level or has a slope. Sloped sites are quite workable but present unique challenges that must be considered. Generally on sloped lots the hangars are placed on the lower section and the home on the higher section which allows the home and hangar to blend with one another nicely.
There are many elements of design that go into a universal home, but several of the most important are constructed into the bathroom area, kitchen, hallways and the construction level of the home. The bathroom is perhaps one of the most important areas of the home, as it is designed to be accessible by combining within the design some handicap requirements. Wider doorways for wheelchair accessiblity, nonslip flooring, wet room style spaciousness and open shower areas are just some of the common features for a handicap bath area that can be enjoyed by all.